We get roughly every quarter tax discs from CCH. Anyway, rather than
throw out obsolete ones, I take them home to try to use them. Well, I
keep getting this pop-up:
I have CCHIRM04 and CCHMBR02.
This message came up when I tried to use the disks on my laptop. I can
use them on my desktop. Perhaps my laptop has a more advanced version
of Windows?
Message Number: 28946
CCH CD-ROM and Online for Windows was unable to download a file. You
might not have sufficient rights to download files to the CCHWINSYS
application directory or certain files (CVLINK, CVHANDLE, etc) in
CCHWINSYS have been incorrectly set with read only attributes. If the
problem persists, call CCH Customer Support.
For the record, I did access the online help and came up with this. I
tried both sets of steps.
I also found this CCHDS9.INI reproduced below.
http://support.cch.com/answers/resultDispl...pe=5002#Goto127
http://support.cch.com/answers/resultDispl...pe=5002#Goto114
[Initialization]
; If the DS9.EXE executable is located somewhere other than in the
; directory with CCHWIN.EXE, set this path ...
;
; Serverpath = C:\CCHWIN\DS9.EXE
; On a VGA screen, this should be wide enough.
Main Window =35, 62, 583, 390, 0
; To disable online (ie: CD customer only), set this = ON
; NO_ONLINE = ON
; To disable CD (ie: Online customer only), set this = ON
;NO_CD = ON
; To enable the International Link Tables button on the data-source
; load dialog, uncomment the following line:
; SwitchLink = ON
; This is the version tag, which is used to detect outdated
; CCHWIN software (to prompt the user to run CCHWIN setup)
UpgradeVersion=V3.50b
[Display]
;Set to NO if you cannot see certain formatting
USECOLORS=yes
;Set to NO if you would rather not see italics, bold and underlining
USEFORMATTING=yes
[DataSources]
DataSource0=E:\
StartUpAutoLoad=YES
ChangeDiscAutoLoad=YES
; These are the entries normally maintained by the "Load Publications"
; dialog. You may (manually, as well) specify 1-100 here:
;
; DataSource1 = F:\
; DataSource2 = YOUR_SERVER/FORMS:\
; This option skips the "Load Publications" dialog and automatically
; loads any DataSources specified above; it can be set from the
dialog.
;
; StartupAutoLoad = ON
; ChangeDiscAutoLoad = ON
; If UseImports==ON, and ImportFile={valid path} then the values in
the
; network ini file overide local settings.
;ImportBlockFrom=$(Import_File:ImportFile), IMPORT_OVERRIDE
[PRINT]
SKIPHPTEST=YES
[DS9]
; This copies down sections of the CD to your hard-disk to
; dramatically improve load-times.
[CCH_BUFFERS]
;
; Buffer sizes are given in K
; Defaults are 1000 and 500.
;
DISK =1000
WINDOWS =500
;The deleteswapfile=on option will delete the swap file of each
; user upon exit of CCHWIN. If the swap file is stored on a network
;drive this option will reduce the amount of hard disk space used by
; CCHWIN.
;DeleteSwapFile = on
[CCH_PATHS]
SYSPATH=C:\CCHWIN\SYS
TMPPATH=C:\Users\Ed\AppData\Local\Temp
CCHWinPath=C:\CCHWIN\cchwin.exe
USERBASEPATH=C:\CCHWIN
;----------------------------------------------------------
; You may wish to provide these paths ...
; Path to the system files:
;
; SYSPATH = C:\CCHWIN\SYS
; Used for writing out the log files, and for the spillfile.
;
; TMPPATH = C:\
; Used for FastLoad and Magnetic Help. Defaults to TMPPATH
;
; MAGSYSPATH = C:\
; Used to point to 'workstation' files. line.pro, modem.pro, and
*.dlg
; Defaults to SYSPATH. CMMethod.pro is different than in ACCESS and
does
; not use this path.
;
; WSPATH = C:\
[COMM_PARMS]
ENGINE =06p03
; Time before idle-logoff warning/disconnection
;
IDLEWARNING =5
IDLEDISCONNECT =15
; To use a communications DLL, set this path:
;
; COM_MODUL=C:\CCHWIN\CMXSYNC.DLL
; This number is not hard coded any more. However, we
; still provide our user a default number to start with.
PHONENBR=1(800)328-2427
COMNETWORK=at&t
BAUD=2400
PID=NewProject
DTE=031343123763400
fMultiConfig=TRUE
fShowEngine=TRUE
fShowATTNbr=TRUE
[Thesaurus]
thescch=<CCH Standard Thesaurus>, ON
; Set the DeleteCache = yes to delete the cached graphic files that
are
;downloaded during an online session. All cached files will be deleted
;upon exit of CCHWIN. The default is NO. Increase or decrease the
;MaxCacheSize. The default is 5 megabytes.
[Cache]
;DeleteCache = YES
;MaxCacheSize = 5000000
;Set the UseImports = on to enable the use of a shared ini file.
; Only applicable for a network install.
[CCHWINS]
;UseImports = On
FASTLOAD=on
[PUBLOCK]
; If UseImports==ON, and ImportFile={valid path} then the values in
the
; network ini file overide local settings.
;ImportBlockFrom=$(Import_File:ImportFile), IMPORT_OVERRIDE
[ID_PARMS]
USERNAME=NewUser
[SSCE]
MainLexPath=C:\CCHWIN\SYS
MainLexFiles=sysignor.tlx,sysignor.clx
HelpFile=C:\CCHWIN\SYS\ssce.hlp
[SSCE User]
UserLexPath=C:\CCHWIN
UserLexFiles=usrignor.tlx,usrsugst.tlx,usrexcld.tlx,C:\CCHWIN\SYS
\syssugst.tlx
IgnoreCappedWords=0
IgnoreAllCapsWords=0
IgnoreMixedDigits=0
IgnoreMixedCase=0
ReportDoubledWords=1
AutoCorrect=0
LastSelectedLex=usrignor.tlx
CaseSensitive=0
SuggestSplitWords=0
PhoneticSuggestions=0
TypographicalSuggestions=1
SplitContractedWords=0
SplitHyphenatedWords=1
SplitWords=0
CharSet=0
Language=1033
MatchCase=1
MinSuggestDepth=1
[COMTUBE_SOCKET]
HOSTNAME=cchwin.cch.com
PORT=6200
[TimeTrak]
fAllowClear=TRUE
[Search]
AutoThesaurus=NO
SortByRelevance=NO
SearchType=Boolean
PLMatchType=all
[HPFONTS]
CCHBOLD_.TTF=TRUE
CCHCB___.TTF=TRUE
CCHCOND_.TTF=TRUE
CCHITALI.TTF=TRUE
CCHNORMA.TTF=TRUE
CCHREVER.TTF=TRUE
CCHSO___.TTF=TRUE
CCHST___.TTF=TRUE
OCRA____.TTF=TRUE