Revenue Procedure 2003-44, Appendix A

---

To Table of Contents

 

Appendix A: Operational Failures and Correction Methods

.01 General rule. .02 Failure to properly provide the minimum top-heavy benefit under § 416 to non-key employees. .03 Failure to satisfy the ADP test set forth in § 401(k)(3), the ACP test set forth in § 401(m)(2), or the multiple use test of § 401(m)(9). .04 Failure to distribute elective deferrals in excess of the § 402(g) limit (in contravention of § 401(a)(30)). .05 Exclusion of an eligible employee from all contributions or accruals under the plan for one or more plan years. .06 Failure to timely pay the minimum distribution required under § 401(a)(9). .07 Failure to obtain participant and/or spousal consent for a distribution subject to the participant and spousal consent rules under §§ 401(a)(11), 411(a)(11), and 417. .08 Failure to satisfy the § 415 limits in a defined contribution plan.

---

Appendix A
Operational Failures and Correction Methods

.01 General rule. This appendix sets forth Operational Failures and Correction Methods relating to Qualified Plans. In each case, the method described corrects the Operational Failure identified in the headings below. Corrective allocations and distributions should reflect earnings and actuarial adjustments in accordance with section 6.02(4). The correction methods in this appendix are acceptable under SCP and VCP. Additionally, the correction methods and the earnings adjustment methods in Appendix B are acceptable under SCP and VCP. To the extent a failure listed in this appendix could occur under a 403(b) Plan, a SEP or a SIMPLE IRA Plan, the correction method listed for such failure may be used to correct the failure.

.02 Failure to properly provide the minimum top-heavy benefit under § 416 to non-key employees. In a defined contribution plan, the permitted correction method is to properly contribute and allocate the required top-heavy minimums to the plan in the manner provided for in the plan on behalf of the non-key employees (and any other employees required to receive top-heavy allocations under the plan). In a defined benefit plan, the minimum required benefit must be accrued in the manner provided in the plan.

.03 Failure to satisfy the ADP test set forth in § 401(k)(3), the ACP test set forth in § 401(m)(2), or the multiple use test of § 401(m)(9). The permitted correction method is to make qualified nonelective contributions (QNCs) (as defined in § 1.401(k)-1(g)(13)(ii)) on behalf of the nonhighly compensated employees to the extent necessary to raise the actual deferral percentage or actual contribution percentage of the nonhighly compensated employees to the percentage needed to pass the test or tests. The contributions must be made on behalf of all eligible nonhighly compensated employees (to the extent permitted under § 415) and must either be the same flat dollar amount or the same percentage of compensation. QNCs contributed to satisfy the ADP test need not be matched. Employees who would have been eligible for a matching contribution had they made elective contributions must be counted as eligible employees for the ACP test, and the plan must satisfy the ACP test. Under this correction method, a plan may not be treated as two separate plans, one covering otherwise excludable employees and the other covering all other employees (as permitted in § 1.410(b)-6(b)(3)) in order to reduce the number of employees eligible to receive QNCs. Likewise, under this correction method, the plan may not be restructured into component plans (as permitted in § 1.401(k)-1(h)(3)(iii) for plan years before January 1, 1992) in order to reduce the number of employees eligible to receive QNCs.

.04 Failure to distribute elective deferrals in excess of the § 402(g) limit (in contravention of § 401(a)(30)). The permitted correction method is to distribute the excess deferral to the employee and to report the amount as taxable in the year of deferral and in the year distributed. In accordance with § 1.402(g)-1(e)(1)(ii), a distribution to a highly compensated employee is included in the ADP test; a distribution to a nonhighly compensated employee is not included in the ADP test.

.05 Exclusion of an eligible employee from all contributions or accruals under the plan for one or more plan years. The permitted correction method is to make a contribution to the plan on behalf of the employees excluded from a defined contribution plan or to provide benefit accruals for the employees excluded from a defined benefit plan. If the employee should have been eligible to make an elective contribution under a cash or deferred arrangement, the employer must make a QNC (as defined in § 1.401(k)-1(g)(13)(ii)) to the plan on behalf of the employee that is equal to the actual deferral percentage for the employee's group (either highly compensated or nonhighly compensated). If the employee should have been eligible to make employee contributions or for matching contributions (on either elective contributions or employee contributions), the employer must make a QNC to the plan on behalf of the employee that is equal to the actual contribution percentage for the employee's group (either highly compensated or nonhighly compensated). Contributing the actual deferral or contribution percentage for such employees eliminates the need to rerun the ADP or ACP test to account for the previously excluded employees. Under this correction method, a plan may not be treated as two separate plans, one covering otherwise excludable employees and the other covering all other employees (as permitted in § 1.410(b)-6(b)(3)) in order to reduce the amount of QNCs. Likewise, restructuring the plan into component plans under § 1.401(k)-1(h)(3)(iii) is not permitted in order to reduce the amount of QNCs.

.06 Failure to timely pay the minimum distribution required under § 401(a)(9). In a defined contribution plan, the permitted correction method is to distribute the required minimum distributions. The amount to be distributed for each year in which the failure occurred should be determined by dividing the adjusted account balance on the applicable valuation date by the applicable distribution period. For this purpose, adjusted account balance means the actual account balance, determined in accordance with § 1.401(a)(9)-5 Q&A-3 of the regulations, reduced by the amount of the total missed minimum distributions for prior years. In a defined benefit plan, the permitted correction method is to distribute the required minimum distributions, plus an interest payment representing the loss of use of such amounts.

.07 Failure to obtain participant and/or spousal consent for a distribution subject to the participant and spousal consent rules under §§ 401(a)(11), 411(a)(11) and 417. The permitted correction method is to give each affected participant a choice between providing informed consent for the distribution actually made or receiving a qualified joint and survivor annuity. In the event that participant and/or spousal consent is required but cannot be obtained, the participant must receive a qualified joint and survivor annuity based on the monthly amount that would have been provided under the plan at his or her retirement date. This annuity may be actuarially reduced to take into account distributions already received by the participant. However, the portion of the qualified joint and survivor annuity payable to the spouse upon the death of the participant may not be actuarially reduced to take into account prior distributions to the participant. Thus, for example, if in accordance with the automatic qualified joint and survivor annuity option under a plan, a married participant who retired would have received a qualified joint and survivor annuity of $600 per month payable for life with $300 per month payable to the spouse upon the participant's death but instead received a single-sum distribution equal to the actuarial present value of the participant's accrued benefit under the plan, then the $600 monthly annuity payable during the participant's lifetime may be actuarially reduced to take the single-sum distribution into account. However, the spouse must be entitled to receive an annuity of $300 per month payable for life beginning at the participant's death.

.08 Failure to satisfy the § 415 limits in a defined contribution plan. The permitted correction for failure to limit annual additions (other than elective deferrals and employee contributions) allocated to participants in a defined contribution plan as required in § 415 (even if the excess did not result from the allocation of forfeitures or from a reasonable error in estimating compensation) is to place the excess annual additions into an unallocated account, similar to the suspense account described in § 1.415-6(b)(6)(iii), to be used as an employer contribution in the succeeding year(s). While such amounts remain in the unallocated account, the employer is not permitted to make additional contributions to the plan. The permitted correction for failure to limit annual additions that are elective deferrals or employee contributions (even if the excess did not result from a reasonable error in determining the amount of elective deferrals or employee contributions that could be made with respect to an individual under the § 415 limits) is to distribute the elective deferrals or employee contributions using a method similar to that described under § 1.415-6(b)(6)(iv). Elective deferrals and employee contributions that are matched may be returned, provided that the matching contributions relating to such contributions are forfeited (which will also reduce excess annual additions for the affected individuals). The forfeited matching contributions are to be placed into an unallocated account to be used as an employer contribution in succeeding periods.

---

To Table of Contents

 

---

Official location: 2003-25 I.R.B. 1051 (June 23, 2003)

Also online at https://benefitslink.com/IRS/revproc2003-44.pdf